汽车尾气分析仪相关技术参数

汽车尾气分析仪相关技术参数如下：详情可联系
 

NO/NO₂/NO_X

Heated Chemiluminescence Nitrogen Oxides Analyzer

加热型化学发光氮氧化物分析仪

TOPAZE 32M

Exists in 2 different versions, to meet your analytical requirements:

存在两个不同版本，来满足您的分析需求。

TOPAZE 32M-S：

NO或NO_X监测

TOPAZE 32M-D:

NO-NO_X和NO₂

同时监测

Remote control using CONTACT^TM software

CONTACT^TM软件用于远程控制

SPECIFIC FEATURES:

专有特征：

Utilizes the CLD technique for continuous and simultaneous measurement of NO、NO2 and NOx, in compliance with EN14792

使用CLD技术对NO、NO₂和NO_X进行连续和同步测量，符合EN14792标准。

Proven EPA reference method

被验证过的EPA参考方法

Accurate measurement in the range:0-10/100/1000/10 000ppm

在量程(0-10/100/1000/10 000ppm)范围内实现准确测量。

Heated analyzer(temperature controlled up to 180℃),measuring chamber under vacuum resulting minimized quenching effect

加热型分析仪（温度控制在180℃）和真空测量腔使淬灭效应最小化。

Graphic Liquid Crystal Display(LCD)

形象的液晶显示面板（LCD）

Interactive menu driven software with enhanced speed display

支持增强速度显示的交互式菜单驱动软件

Real time calibration graph

实时校准图

Built-in memory for data storage

内置存储器用于数据存储。

Built-in Ethernet TCP/IP connection for remote control and serial interface RS232

内置以太网TCP/IP连接用于远程控制和RS232通讯

Fast response time(<2s)

快速的响应时间（<2s）

Communication by AK protocol(RS232/RJ45)

通过AK协议(RS232/RJ45)进行通讯

APPLICATIONS:

应用：

Engine manufacturing and testing in the automotive, heavy duty, aviation, marine, rail transport sectors, etc.

汽车行业、重型机械、航空、船舶和铁路运输部门等发动机制造和测试

Continuous Emission Monitoring

在线连续监测

Combustion control

燃烧控制

Process monitoring

过程监测

Laboratories and Research Centres...

实验室和研究机构等

Heated Chemiluminescence N

加热式化学发光氮氧化物（NOx）分析仪

TECHNICAL SPECIFICATIONS:

技术参数：

Ranges:0-10/100/1000/10000ppm

量程：0-10/100/1000/10 000ppm

Noise(2 sigma):<1%F.S.

噪声（2 σ）：<1%F.S.

Lower detection limit:0.1ppm on the lowest range

低检测限：0.1ppm（在最低量程）

Response time:<2sec(T_10-90)

响应时间：<2s(T_10-90)

Zero drift:±1%/24h

零点漂移：±1%/24h

Span drift:±1%/24h

量程漂移：±1%/24h

Linearity:±15 for a concentration between 15% and 100% of the full scale’s range

线性度：±1% 测量气体浓度（气体浓度在15%-100%F.S内）

Sample flow rate:0.7 to 1L/min at 20psi

取样流量：0.7-1L/min（压力为20psi时）

Capillary block temperature: heated up to 180℃

校准模块温度：加热至180℃

Housing:Standard19’-3U rack

机壳：标准19”-3U机箱

Dimension：483x440x135mm(LxWxH)

           19x17.3x5.3 inches(LxWxH)

尺寸：483x440x135mm（LxWxH）

      19x17.3x5.3 inches(LxWxH)

Weight:10Kg/22lbs

重量：10Kg/22磅

Operating temperature:5-45℃

工作温度：5-45℃

Communication：RS232＆TCP/IP,AK protocol

通讯：RS232＆TCP/IP,AK协议

Ethernet network connection

以太网连接

UTILITIES:

工具：

Power supply:

-230V,50Hz-115V,60Hz

-Consumption 350VA

电源供电：

-230V，50Hz-115V、60Hz

-功耗 350VA

O2 100% for the ozone generator(engine gas applications) or synthetic/purified for other applications

O₂ 100%用于臭氧发生器（发动机气体应用场合）或人工/净化空气用于其它应用场合

OPTIONS AND ACCESSORIES:

可选项及附件：

Memory extension

存储器拓展

Internal heated-pump(for standalone use)

内部加热泵（单独使用）

Heated line with SS 2um built-in filter

加热线（含SS 2um内置滤芯）

ESTEL electronic board（1 or 2）with:

-4 independent analog input

-4 independent analog outputs

-4 remote control inputs

-6 dry contacts outputs

ESTEL电路板（1或2）含有：

4个独立的模拟输入

4个独立的模拟输出

4个远程控制输入

6个固态继电器输出

SOREL electronic board with:

-4 dry contacts outputs

-4 dry contacts inputs

SOREL电路板含有：

4个固态继电器输出

4个固态继电器输入

Special version without LCD screen for use in engine gas cabinet:

特殊版本（无LCD显示屏）用于发动机气体机柜

PRINCIPLE OF OPERATION:

工作原理：

TOPAZE 32M analyzer uses the proven Chemiluminescence technique for the measurement of NO/NOx.

TOPAZE 32M分析仪使用已经被验证过的化学发光技术实现对NO/NOx的监测。

In the NO mode, the technique relies on the chemiluminescent reaction between ozone(O₃) and nitric oxide(NO) yielding nitrogen dioxide(NO2) and oxygen. This reaction produces light whose intensity is proportional to quantity of NO being sampled.

在NO模式，检测技术依赖于通过NO和O₃的化学发光反应生成NO₂和O₂，本反应产生的光，其强度正比于NO的取样浓度。

For total NOx, the sample is first passed through the internal NO₂ to NO converter which converts the NO2 in the sample to NO. The resulting reaction is directly proportional to the total concentration of NOx.

对于NOx总量，样品首先通过内部的氮氧转化炉，将样品中的NO2转化为NO。经转化炉转化后的化学反应的光强度正比于NOx总浓度。

DEscriptION:

描述：

TOPAZE 32M analyzer is equipped with a heated inlet capillary block and measurement chamber, which maintains the sample above its’dew point to prevent condensation inside the analyzer. The analyzer is microprocessor controlled, with complete gas data, internal diagnostics, alarms, and calibration settings available to the operator via the keypad or remotely using CONTACT^TM Software via TCP/IP or RS232. Ranges can be automatically or user selectable via the keypad. Automatic calibration may be programmed for preset intervals or initiated remotely.

TOPAZE32分析仪配备一个加热的入口毛细管模块和测量腔来保持取样样品高于其露点温度，避免在分析仪内部冷凝。分析仪由微处理器控制，用户可以通过TCP/IP或RS232由键盘或CONTACT^TM远程控制软件获取所有气体测量数据、内部诊断、报警和校准设置信息。量程为自动的或由用户通过键盘选择。自动校准可以通过编程选择预设频率或远程启动。

TOPAZE 32M-S:Equipped with a single reaction chamber, TOPAZE 32M-S allows the monitoring of NO or NOx(manual or remote-controlled selection).

TOPAZE 32M-S:

配备一个单反应腔，TOPAZE 32M-S用于NO或NOx监测（手动控制或远程控制可选）

TOPAZE 32M-D: Uses dual reaction chamber and 2 PM tubes: the TOPAZE 32M-D: is conceived for the simultaneous monitoring of NO-NOx and NO₂

TOPAZE 32M-D:使用双反应腔和两个PM管，TOPAZE 32M-D设计用于NO-NOx和NO₂同时监测。