本页面标准信息均来源于网络收集，或由参与标准制定的供应商提供，只作为参考使用，为确保测试结果的准确性、节省您的时间，如需ISO 11507-2007标准详细信息或ISO 11507-2007具体测试方法，欢迎与我们技术人员联系或给我们留言，我们将为您相关的技术支持。
ISO 11507-2007标准介绍
1 Scope
This International Standard specifies exposure conditions for paint coatings exposed to artificial weathering inapparatus including fluorescent UV lamps and condensation or water spray. The effects of weathering areevaluated separately by comparative testing of chosen parameters.
NOTE The ultraviolet light produced by fluorescent lamps simulates only part of the UV region of natural sunlight and,consequently, the test pieces are subjected to a small but destructive portion of the spectrum.
Due to the lack of visible and infra-red energy in the light from such UV lamps compared to sunlight, the testpieces are not heated above the temperature of the surrounding air in the way in which they would be inpractical use.
2 Normative references
The following referenced documents are indispensable for the application of this document. For datedreferences, only the edition cited applies. For undated references, the latest edition of the referenceddocument (including any amendments) applies.
ISO 1513, Paints and varnishes — Examination and preparation of samples for testing
ISO 1514, Paints and varnishes — Standard panels for testing
ISO 2808, Paints and varnishes — Determination of film thickness
ISO 3696: 1987, Water for analytical laboratory use — Specification and test methods
ISO 4892-1 : 1999, Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling
▼ISO 11507-2007第三方检测机构
以上标准信息来自互联网搜索整理，如需了解完整的ISO 11507-2007的信息或ISO 11507-2007标准解读，欢迎详询。
QQ交流群
