Ring wave generator （from site:sz3ctest）

As the power supply and control switch （or triggered by lightning） generated by transient phenomena, in the power lines, control lines and signal line generated ring-wave interference, and to this end in the domestic, commercial and industrial electrical and electronic equipment, anti - Scrambling degrees to establish a common performance evaluation criteria. SGZ-6012G Smart ringing wave simulator to meet GB/T17626.12 IEC61000-4-12 （2006 version） and ANSI C62.41 / 45 of the latest demand.
● Large LCD screen display, built-in computer control, human-computer dialogue, simple operation
● the main switch using the import of electronic switches, to ensure that the waveform stability, and comparability of strong, long life
● program-controlled high voltage power supply, voltage stability and high accuracy, voltage current monitoring
● positive or negative automatic switch test can be alternay positive and negative polarity switch
● trial software control without human operation
● surge into the phase angle of 0-360 ° is free to set up
● can establish a connection Oscillograph communications, direct observation of waveform （optional）
● computer communication interface, can be implemented remote control
Main technical parameters

Specification:

Open circuit voltage oscillation frequency（1/T）	100KHz±10%
Open-circuit output voltage  （PK1）	（250V～6000V）±10%
The forefront of the open circuit voltage waveform（T1） （10%～90％）	PK1（0.5μs±30%）
Open-circuit voltage decay rate:	40%<（PK2）/（PK1） < 110% 40%<（PK3）/（PK2）<80% 40%<（PK4）/（PK3）<80%
Short-circuit current wave of cutting-edge （T2） （10% ~ 90%）	P1≤0.9μs
Open circuit voltage （PK1） 6000V when the short-circuit current （P1）	12Ω时500A ±10% 30Ω时200A±10% 200Ω 30A±10%（Matching）
Adjacent pulse interval	1s～99s
Pulse frequency	1～9999 times
Output mode	Automatic switching or alternating positive and negative polarity
Output impedance	12Ω，30Ω
Phase into the way	Asynchronous or synchronous  （0º～360º）±10º
Sample coupling / decoupling network	Automatic matching lightning network SGN-5010G（Single-phase 16A） SGN-20G（Three-phase five-wire 16A）
SIZES（D×W×H）mm	560×475×245

交流咨询:   在线:
 欢迎交流电磁兼容EMC&高压测试（冲击电压、冲击电流）进入:了解更多其他配置方案及知识电磁兼容配置方案一、电磁兼容知识大汇总二、静电放电抗干扰试验系统【IEC61000-4-2 】三、射频磁场辐射抗绕度试验【IEC61000-4-3 】四、电快速瞬变脉冲群的抗干扰度试验【IEC61000-4-4 】五、雷击浪涌抗干扰度试验【IEC61000-4-5 】六、射频传导抗扰度试验【IEC61000-4-6 】七、工频磁场抗扰度试验【IEC61000-4-8 】八、脉冲磁场抗扰度试验【IEC61000-4-9 】九、电压跌落、短时中断和渐变抗扰度试验【IEC61000-4-11】
十、谐波电流、电压波动和闪烁系统【IEC61000-3-2，IEC61000-3-3】
十一、衰减震荡&振铃波抗扰度试验【IEC61000-4-12】十二、汽车电子沿电源线电瞬态传导抗扰度试验【ISO7637-2，GB/T21437】
十三、电磁兼容屏蔽室建设方案【EN50147-1, GB12190】十四、传导发射测试系统【CISPR22】十五、辐射发射测试系统【CISPR22】
十六、喀呖声干扰测试系统【CISPR22】